Fruitpulper.com / Non-collecting planning tool
Build a fruit pulper specification before requesting supplier quotations.
Use one brief for every supplier so machine labels, prepared-feed capacity, included scope and acceptance evidence are compared on the same basis. This worksheet prints locally and does not collect, save or transmit project information.
Fix the feed and product boundary
Describe the fruit or vegetable, variety, maturity window, temperature, preparation and unwanted solids. State the accepted product texture and the reject condition that must be observed during a representative trial.
Separate prepared-feed rate from finished output
State nominal and peak prepared-feed rate, operating hours and cleaning allowance. If an output target is commercially important, list it separately with the measurement window and material-balance method required to verify it.
Make supplied scope and acceptance visible
List screens, drives, controls, guards, pumps, platforms, spare parts, documentation and services. Attach pre-agreed trial, cleaning and sign-off evidence so omissions cannot be hidden inside a single total price.
| Section | Minimum basis | Do not accept as a substitute |
|---|---|---|
| Process duty | Prepared feed, accepted product, reject and preparation boundary | A generic fruit list or machine name |
| Capacity | Prepared-feed unit, nominal/peak rate, hours and cleaning allowance | A number without feed state or time basis |
| Configuration | Stage duty, screen set, controlled variables and included auxiliaries | Motor power as the complete selection basis |
| Acceptance | Stable-run rule, sampling, mass balance, quality criteria and deviations | A photo or one-sided output sample |
| Commercial scope | Delivery basis, services, documents, spares, exclusions and milestones | An unexplained equipment total |
Keep a common record
Printable fruit pulper supplier brief
Complete the known facts, mark unresolved items as unknown, and issue the same revision to every supplier. Handwritten entries remain on the printed copy only.
1. Feed and preparation
| Item to agree or record | Value / evidence / decision |
|---|---|
| Material, variety and intended product | Write on the printed copy |
| Maturity, size, temperature and seasonal range | Write on the printed copy |
| Washing, sorting, cutting, crushing, heating or destoning before the pulper | Write on the printed copy |
| Stones, seeds, peel, fibre and other reject solids | Write on the printed copy |
2. Product and reject acceptance
| Item to agree or record | Value / evidence / decision |
|---|---|
| Accepted stream: pulp, puree or pulpy juice | Write on the printed copy |
| Texture, particle, fibre, peel, seed or fragment observations | Write on the printed copy |
| Reject composition, useful product retention and desired sample points | Write on the printed copy |
| Sample method, units, limits, tolerances and record IDs | Write on the printed copy |
3. Capacity and operating basis
| Item to agree or record | Value / evidence / decision |
|---|---|
| Nominal and peak prepared-feed rate with units | Write on the printed copy |
| Daily operating hours, campaign length and expected starts/stops | Write on the printed copy |
| Cleaning and changeover allowance used for net production time | Write on the printed copy |
| Separate finished-output target and measurement method, if required | Write on the printed copy |
4. Machine and interface scope
| Item to agree or record | Value / evidence / decision |
|---|---|
| Single- or multi-stage duty and screen trial range | Write on the printed copy |
| Rotor, paddle or screw controls to record during trials | Write on the printed copy |
| Feed, accepted-product and reject connections, elevations and transfer method | Write on the printed copy |
| Voltage, frequency, phase, water, air, drainage and control interfaces | Write on the printed copy |
5. Cleaning, safety and documentation
| Item to agree or record | Value / evidence / decision |
|---|---|
| Opening, screen removal, safe handling, drainage and inspection sequence | Write on the printed copy |
| Manual/open cleaning, assisted rinse or validated CIP boundary | Write on the printed copy |
| Guards, isolation, access platform and approved operating procedures | Write on the printed copy |
| Drawings, manuals, material documents, spare-parts and maintenance records | Write on the printed copy |
6. Trial, delivery and commercial scope
| Item to agree or record | Value / evidence / decision |
|---|---|
| Representative test lot, stable-run rule and three-stream mass balance | Write on the printed copy |
| FAT/SAT witnesses, pass/fail/conditional criteria and deviation close-out | Write on the printed copy |
| Packaging, delivery basis, installation, commissioning and training | Write on the printed copy |
| Included screens, consumables, recommended spares, warranty and exclusions | Write on the printed copy |
Questions before a trial
Does this worksheet send information to FruitPulper?
No. It is static content with print-only write-in spaces. It has no submission action, personal-information fields, email control, storage or network request.
Should every blank be guessed before asking for a quote?
No. Mark unknowns explicitly and ask suppliers to state assumptions, test requirements and decisions that must be resolved before selection.
Can the same template be used for every fruit?
The section structure can be reused, but the material envelope, preparation, target, hazards, screen trial and acceptance criteria must be specific to the project.
Technical references and scope
These sources explain general mechanisms and methods. Another supplier's model, rating or claimed results are not specifications for fruitpulper.com.
Equipment quotation
Tell us what the machine will process.
Send the fruit, prepared-feed rate and target pulp or puree. Include a drawing or trial record when available; you can enquire without a screen size.