Feed arrangement
Present a controlled material stream to the separation chamber without hiding the upstream preparation duty.
Fruitpulper.com / Equipment / DJ two-stage series
DJ two-stage fruit pulper and finisher
This two-chamber stainless machine places coarse pulping and a second refining duty in series. The published DJ family spans five reference sizes. Match a size to the prepared fruit, screen and finished pulp through a real product trial and a model-specific drawing.
01 / DJ series · five catalogue sizes
- Prepared feed
- Prepared, washed or softened fruit within the agreed stone, size and temperature envelope; direct whole-fruit feeding is material-specific.
- Product and reject
- Pulp or puree from the two screened stages, with retained peel, seeds and fibre discharged separately.
The five DJ catalogue sizes are reference ratings for the equipment family, not guarantees for every fruit or screen. The pictured machine is a family example, not proof of an exact DJ model or customer installation.
Request this equipmentMachine views and construction
DJ model references
| DJ model | Reference capacity (t/h) | Installed motor power (kW) | Screen aperture range (mm) |
|---|---|---|---|
| DJ-3 | 1–3 | 4.0 × 2 | 0.4–1.5 |
| DJ-5 | 5 | 7.5 × 2 | 0.4–1.5 |
| DJ-10 | 10 | 18.5 × 2 | 0.4–1.5 |
| DJ-15 | 15 | 30 + 18.5 | 0.4–1.5 |
| DJ-25 | 25 | 45 + 37 | 0.4–1.5 |
These published catalogue values are reference ratings. Confirm the feed, screen, electrical supply and selected machine drawing before ordering; the image identifies the family, not an exact size.
Working parts and connections
01
Prepared feed
Define fruit, temperature and upstream preparation.
Rotor action + screen surface
Functional illustration; not a machine drawing02
Through-screen product
Test texture and defects against the product brief.
03
Retained solids
Inspect integrity and useful pulp remaining.
- DJ-3, DJ-5, DJ-10, DJ-15 or DJ-25 catalogue frame
- First-stage and second-stage screen arrangement
- Interstage transfer, product outlet and reject collection
Stage one protects the finishing duty
A coarse screen can remove larger peel, seed or fibre and reduce the solids burden reaching a finer screen. The target is a stable feed to stage two, not simply maximum force in stage one.
Stage two controls the final texture
The finishing screen is evaluated against particle profile, visible defects and product loss in the reject. A smaller aperture alone does not guarantee a better product if it blinds, shears unwanted material or rejects useful pulp.
Cleaning time belongs in capacity planning
Two stages increase screens, seals, access points and changeover work. Quote net production hours after cleaning and inspection, and verify whether stages can be opened, removed and reassembled safely.
Installation, cleaning and acceptance
Confirm inlet and outlet elevations, transfer pump or buffer interface, safe screen access and discharge handling on the selected drawing. During a witnessed material trial, collect product and rejects over the same interval and record product quality, retained useful pulp and any damaged hard bodies.
Review acceptance pointsInspect the working parts
Rotor and paddles
Move material against the screen with a defined mechanical action while transporting retained solids towards discharge.
Screen basket
Provide the separation surface through which the desired product fraction passes.
Reject discharge
Remove retained solids as a distinct measured stream without treating dryness alone as success.
Product collection
Capture and transfer the through-screen stream while preserving an identifiable sampling boundary.
Drive, guards and service access
Support the defined rotor duty and planned maintenance access without using installed power as a stand-alone performance claim.
Equipment quotation
Tell us what the machine will process.
Send the fruit, prepared-feed rate and target pulp or puree. Include a drawing or trial record when available; you can enquire without a screen size.